TMBRA - Rider Board

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

knee pain ???? again doc....

 
Post new topic   Reply to topic    TMBRA - Rider Board Forum Index -> Ask the Bike Doc
View previous topic :: View next topic  
Author Message
dannybaggett
New


Joined: 16 Feb 2005
Posts: 42

PostPosted: Sun May 31, 2009 8:27 pm GMT +0000    Post subject: knee pain ???? again doc.... Reply with quote

hey doc....i have a friend that is having knee pain on the outside of her mid to lower knee.....we did a lot of hills yesterday (road ride), and it was still hurting today. i have tried to tell her that sh needs to spin a higher cadence but she likes to mash those big gears. i am going to look @ her position on the bike in a couple of days and i was wandering if you could give me the formula, again, on saddle position related to knee pain, and any other suggestions you might have in that brilliant mind of yours........thanks so much.
danny
Back to top
View user's profile Send private message
The Bike Doc
250+


Joined: 08 May 2003
Posts: 1398
Location: Corpus Christi and Warda, Texas

PostPosted: Sat Jun 06, 2009 8:03 pm GMT +0000    Post subject: Reply with quote

Danny:

I found the post, it was a few years old but the info is still good. Here is the info.

The location of the knee pain can be a clue. Pain along the inside of the knee points to the cleats positioning the toes too far out. The feet could also be too far apart and the cleats need to be shifted to the outer aspect of the sole to move the feet in. If the pain is along the outside of the knee the cleats may be positioning the toes in too far. Also the feet could be too close together and the cleats may have to be shifted to the inside of the sole to move the feet further apart. You want the cleats positioned so that your shoe will be clipped in a position that reproduces the natural position your feet prefer to be in. Do this little test: get barefoot and wet the bottom of your feet and walk across a concrete floor in your usual gate. Look back at your foot prints. Note if you are a toe out walker or a toe in walker. Most people are toe out walkers, though a few will be toe in or neutral with toes to the center of the heal strike. Also note how far apart the balls of the feet are from each other. Position your cleats so they reproduce natural direction the toes fall relative to the heal strike and the distance the feet tend to stay apart at the balls when walking. With the shoes off your feet, adjust the cleat position 180 degrees out of phase to the direction you want the toes to go because when you are looking at the cleats the shoes are upside down so if you rotate the cleat right the toe will go left when you flip the shoes over and clip them in. Clip the shoes into the pedal (still no feet in the shoes) and note the position that the shoe naturally falls. Fine tune the cleat position until the shoe falls the way your feet naturally fall when you walk. Do make sure that the cleat release point is at the minimal amount of rotation to allow release because rotating the heal much past 5 degrees to activate release can put undue strain on the knees. Eggbeater pedals do not allow tension adjustment for the release point. This can be a problem as excess tension required to activate release can also cause knee strain. Other clipless pedal bands do allow tension release adjustment.

Other things to consider in knee pain include seat height. A seat that is too low or too far forward can lead to pain in the front of the knee. If you are getting pain to the back of the knee the seat may be too high or too far back. Some clipless pedals can effectively lengthen the seat height relative to standard platform pedals because the shoe is effectively placed lower on the pedal and closer to the axis of rotation and effectively lengthening the distance from the seat to the bottom of the shoe. If the seat is down too low where your knee has more than a 15 degree bend for off road riding and a 10 degree bend for road riding when the pedal is at bottom dead center, you can get undo strain on the knee cap from over flexing the knee at top dead center of your stroke. Also note your pedaling style, if you pedal with your heals down then you will need to bring your seat down slightly relative to level foot pedaling and if you pedal heals up, toes down, you will want to have your seat higher than a level foot adjustment.

Also look seriously at going with shorter cranks. Mountain bikes come stock with 175 mm cranks. Road bikes come with 172.5 or 170mm cranks. You may benefit from going to 170, 165 or even 155 mm cranks to keep your knee from over flexing at top dead center of pedal rotation. With the shorter cranks you will get the added advantage of improved ground clearance when your cranks are at the bottom of the stroke and they will make it easier to spin smoothly at a high cadence. While on the bike keep the gearing low and the RPM up shooting for cadences above 90 RPM. “The Man,” Lance, used a cadence of 100 to 110 on the long climbs in the mountain stages. Switch to a low gear cluster on the back such as a 12 – 34 for your mountain bike and a 12-27 for your road bike to help spare your knees further.

If you do knee exercises such as extensions, squats and leg curls, bend your knees only 45 degrees to keep the load down on the knee caps. Also keep the weights down. You will have greater benefit with higher reps with lower weights than with low reps with maximal weight.

I hope this helps.

Thanks,
_________________
Paul K. Nolan, MD
AKA: The Bike Doc
Back to top
View user's profile Send private message Visit poster's website
dannybaggett
New


Joined: 16 Feb 2005
Posts: 42

PostPosted: Sun Jun 07, 2009 5:41 pm GMT +0000    Post subject: Reply with quote

thanks alot doctor nolan, as always you are a big help. i will tinker with her cleat position, and saddle height and see if i can get it figure out.
danny
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    TMBRA - Rider Board Forum Index -> Ask the Bike Doc All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group